100-58-77-01.12
OmPlecs®-TOP 200 AMR 0,7-B -1- LW
Multiband-Train Antenna with certification / approval according to train standard EN 50155 for mounting on trains and vehicles.
RF port:
ⓐ - Bündelfunk / TETRA / UIC
ⓑ - GPS / GLONASS / Galileo / BeiDou
Frequencies (MHz):
GNSS-Configuration (passive)
GNSS / L1 / G1 / E1 / B1 (GLONASS (G1) / 1602) , GNSS / L1 / G1 / E1 / B1 (GPS (L1) 1575,42) , GNSS / L1 / G1 / E1 / B1 (QZSS / 1575,42) , GNSS / L1 / G1 / E1 / B1 (Galileo (E1) / 1575,42) , GNSS / L1 / G1 / E1 / B1 (BeiDou (B1) / 1561,098)
Mechanics:
Type (OmPlecs-TOP 200)
Height (60mm)
TETRA (410 - 430) , TETRA (380 - 400)
The OmPlecs-TOP 200 AMR train antenna series is characterized by an extremely flat design of only 40mm or 60mm with a high antenna gain. By using metallic emitting structures without lossy components, a very high efficiency and service life is achieved. The multiband technology with selective port assignment enables the use of several frequency bands on one RF port and cost reduction through unnecessary splitters or couplers.
Product downloads:
| Data sheet | 445 KB | |
| Overview drawing | 224 KB | |
| Drilling pattern | 168 KB | |
| 3D model | 1 MB | |
| Matching diagram | 530 KB | |
| Radiation diagram | 712 KB |
Further technical information, assembly instructions, certificates and declarations of conformity can be found here
The matching amplifier for your outdoor railway antenna solution
OmPLifi V-AMR-GPS/GLONASS Amplifier
The OmPLifi V-AMR series GPS amplifiers are EN50155 certified with high filter quality, exceptional gain, low noise figure and are suitable for mounting on and in rail vehicles and vehicles. The GPS amplifier is always included in the scope of every delivery of the railway antennas with GPS function as an accessory. It is optionally available with an integrated DC blocker.
Discover the amplifiers
The matching cable for your outdoor - train - antenna solution
OmProCab-5
Our latest product is the OmProCab-5. It is a quadruple shielded, low-loss coaxial cable with a flexible inner conductor and certification/approval. The cable is produced in accordance with railway standard EN 45545-2 for the installation in rail vehicles and motor vehicles. The highlights are the combination of very good HF properties, the flexible inner conductor and the fire certification according to the railway standard. These characteristics makes it the ideal accesscory to use with our railway antennas.
